Sophos XGS 5500 Manual Del Usuario página 5

ENGLISH
2. Mount and connect the appliance
Please follow the rack mounting instructions as described in the XGS Operating Instructions Guide
separate instructions provided with your rack mount rails.
Connect the ports to the internal and external networks
1. Connect the MGMT port via a switch to the internal network. For this purpose, use the RJ45 Ethernet
cable provided. Note that your Administration PC must also be connected to this network.
2. Connect Port 2 to the external network. The connection to the WAN depends on the type of Internet
access.
XGS appliances are shipped with the following default settings:
Ethernet Port
1/LAN
2/WAN
MGMT
Admin Console Username
admin
Default Gateway
DHCP
4
IP Address
172.16.16.16/255.255.255.0
DHCP
10.0.1.1/255.255.255.0
Admin Console Password
admin
DNS
DHCP
* or the
Zone
LAN
WAN
LAN
CLI Console Password
admin
DHCP Service
Enabled
* Available at www.sophos.com/firewall-documentation
Quick Start Guide XGS 5500/6500