Other Ports
Type
COM
RJ45/Micro USB
USB
USB 3.0 (Type A)
MGMT
RJ45 (10/100/1000 Mbps)
Reset
Button
Module Slots
A/B
C/D
(D on XGS 6500 only)
Compatible Modules
*
8 port GbE copper
8 port GbE SFP
8 port 10 GbE SFP+
4 port GbE copper – 2 Bypass groups
2 port 40 GbE QSFP+
4 port 10 GbE SFP+
2 port GbE fiber (LC) Bypass + 4 port GbE SFP
2 port 10 GbE fiber (LC) Bypass + 4 port 10 GbE SFP+
4 port 2.5 GbE copper + 12 port GbE High-Density module
Quick Start Guide
XGS 5500/6500
Comment
You can connect a serial console to either the RJ45 or micro USB COM port to access the CLI. Only one
port can be used at any time. If both ports are connected then the micro USB port will take precedence.
The required connection settings are:
Ì Bits per second: 38,400
Ì Data bits: 8
Ì Parity: N (none)
Ì Stop bits: 1
You can connect a USB 2.0 or 3.0 compatible device to this port (e.g. USB thumb drive, UPS, 3G/4G dongles.
We recommend using this dedicated port to connect your Admin PC.
Press and hold for >10 seconds to reset the unit to factory default settings.
All configuration, reports and patterns will be flushed.
Type
Flexi Port
High-Density Flexi Port
**
** Please note: For electromagnetic reasons, please only use shielded RJ45 Ethernet cables on all ports of this module.
Comment
Can be used for any Flexi Port module listed in the table below.
Can be used for the High-Density Flexi Port Module listed in the table below.
Comment
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
Flexi Port
High-Density Flexi Port
ENGLISH
* SFP/SFP+/QSFP transceivers are sold separately.
3