Installation Procedure For Windows 2000 - Belkin F5U508 Manual Del Usuario

Installation

Installation Procedure for Windows 2000

This installation procedure will successfully install two USB 1.1 OHCI
controllers, one USB 2.0 EHCI host controller, and one IEEE 1394 host
controller.
If you are running Windows 2000 with Service Pack 4, all required drivers are
already included in your operating system. It is not necessary to install the
EN
drivers included on the F5U508 installation CD.
To confirm which version of Windows is installed on your computer, right-
click the "My Computer" icon located on your Windows desktop, then select
"Properties".
The "System Properties" window will open and provide information regarding
the version of Windows installed on your computer. If Windows Service Pack
3 or below is installed, you must install the drivers provided on the F5U508
installation CD.
If you find that Windows 2000 Service Pack 4 is installed, follow the steps
below.
1. Open the Start menu in the lower, left-hand corner of your Windows
desktop, then select "Shut Down" and click "OK".
2. Once the computer is completely shut down, remove the computer's cover
and locate an empty PCI slot.
11
5248ea-A_F5U508ea.indb 11 14/2/07 9:08:50 am