Removing The Door - LG GSX961NSAZ Manual Del Propietário

Removing the Door

When it is necessary to move the appliance
through a narrow opening, removing the doors is
the recommended procedure.
WARNING
• Disconnect the power cord, house fuse or
circuit breaker before installing or service the
appliance. Failure to follow these instructions
may result in death, fire or electric shock.
If your entrance door is too narrow for the
appliance to pass through, remove the appliance
doors and pass the appliance laterally.
[For freezer door only]
1
Hold the 2 tube connectors at the bottom of
the appliance with your fingers and pull them
out so that the hoses can then be carefully
removed by following the instructions in step
2.
2
While pressing the collet part of the tube
connector, remove the connected water
tube.
Tube connector
Collet
Water tube
14
[For both freezer and fridge]
3
Remove the screw of the hinge cover
on top of the appliance by rotating it
counterclockwise.
4
While pressing (1) hook of the link of the
electrical connectors, remove the link by
pulling it in both directions.
5
Remove the hinge lever by tapping the end
of it toward the outside edge of the cabinet.
CAUTION
• When removing the upper hinge, be sure to
support the door as it will fall forwards. It is
recommended that two or more people carry
out the door removal and refitting.
EN