Kicker KM6250.2 Manual Del Propietário página 4

Wiring: Carefully place the speaker wire in a location that is clear of standing water and moving
components of the vessel. For reference, the Blue wire is Positive and the Grey wire is Negative. Mount
the crossover to the woofer's back plate with the enclosed phillips-head M3 stainless steel machined
screws, or mount the crossover remotely in a location free and clear of standing water. The locking
crossover cover with water resistant gasket is removable for wiring installation; it helps prevent terminal
corrosion and electrical shorting. The positive and negative gold plated terminals are of different sizes and
correspond to the appropriate gold plated positive and negative wire connectors. Take off the crossover
cover, and connect the wire from the woofer to the "WF" terminal and the wire from the tweeter to the
"TW" terminal. Connect the supplied 15 feet (4.5m) of wire to "IN" terminal in the crossover. Carefully route
the wires through the slot between the crossover and crossover cover, and snap the crossover cover
back on the crossover. Connect the other end of the heavy gauge wire to your amplifi er in accordance
with its owner's manual.
Source Unit or Amplifi er
4
2011 KM Components RevB.indd 4 2011 KM Components RevB.indd 4
Slot
Integrated moisture draining system
Crossover Cover
1/28/2011 3:03:24 PM 1/28/2011 3:03:24 PM