Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTRUCTIONS AND PARTS LIST FOR 1450HP, 1451HP, 1452HP, 1453HP, 1454HP,
Read and understand "Safety Instructions For Air Tools" and these instructions before
AIR SUPPLY
The efficiency of the tool is dependent on the proper supply of clean dry air at 90 psig (6.2 bar). The use of a line filter, pressure
regulator, and lubricator will insure maximum output and life of tools. Before connecting tool, blow out the air line to remove water
and dirt which may have accumulated.
HOSE AND HOSE CONNECTIONS
Supply hose should be not less than 3/8" (10mm) I.D. Extension hoses should be at least 1/2" (13mm) I.D. Use couplings and fittings
with at least 3/8" (10mm) I.D.
LUBRICATION
Use SIOUX No. 288 air motor oil. An airline lubricator, set to deliver 2 to 4 drops per minute, is recommended. If a lubricator is not
used, add .04 oz. (1.2cc, 12 to 15 drops) of oil into the air inlet twice daily.
Lubricate the gearing every 100 hours of operation with SIOUX No. 289A grease.
GENERAL OPERATION
This tool is equipped with a teasing throttle. By slightly depressing the trigger the chuck will rotate slowly. This is useful for
starting a drill bit without first spotting with a punch. The tool will run at maximum speed when the trigger is fully depressed.
If the gear case is removed or loosened, re-tighten to 35 ft-Ib.
We, Sioux Tools Inc., 2901 Floyd Boulevard, P.O. Box 507, Sioux City Iowa, 51102, USA, declare under our sole responsibility that the
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
Sioux City, Iowa, USA
1455HP, 1456HP DRILLS
(SERIAL "B")
operating this tool.
SOUND AND VIBRATION READINGS
*Sound Pressure *Sound Power
Catalog No.
dBA
1450HP
81.2
1451HP
81.2
1452HP
81.2
1453HP
81.2
1454HP
81.2
1455HP
81.2
1456HP
81.2
*per PN8NTC1
DECLARATION OF CONFORMITY
1450HP, 1451HP, 1452HP, 1453HP, 1454HP, 1455HP, 1456HP
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
June 1, 1997
Sioux Tools Inc.
Date and place
of issues
*Vibration
dBA
93.33
Less Than 2.5
93.33
Less Than 2.5
93.33
Less Than 2.5
93.33
Less Than 2.5
93.33
Less Than 2.5
93.33
Less Than 2.5
93.33
Less Than 2.5
*per PN8NTC1
*per ISO 8662
products
R. V. Caskey
President
Name and position
Signature of issuer
of issuer
1
Form ZCE449
Date 10-97/A
Page 1 of 12
m/s
2
Printed In U.S.A.
Publicidad
Tabla de contenido
Manuales relacionados para SIOUX 1450HP
Resumen de contenidos para SIOUX 1450HP
- Página 1 LUBRICATION Use SIOUX No. 288 air motor oil. An airline lubricator, set to deliver 2 to 4 drops per minute, is recommended. If a lubricator is not used, add .04 oz. (1.2cc, 12 to 15 drops) of oil into the air inlet twice daily.
-
Página 2: Allgemeiner Betrieb
*per PN8NTC1 *per ISO 8662 KONFORMITÄTSERKLÄRUNG Wir, Sioux Tools, Inc., 2901 Floyd Boulevard, P.O. Box 507, Sioux City, Iowa, 51102, USA, erklären hiermit alleinverantwortlich, daß die Produkte, 1450HP, 1451HP, 1452HP, 1453HP, 1454HP, 1455HP, 1456HP auf die sich diese Erklärung bezieht, mit den Anforderungen der folgenden Standards oder Normen oder Dokumenten übereinstimmen: EN 792 (Entwurf) EN 292 Teile 1&2, ISO 8662, Pneurop PN8NTC1... -
Página 3: Suministro De Aire
LUBRICACION Utilice un aceite para motores neumáticos SIOUX No. 288. Se recomienda un lubricador de tubo de aire que distribuya de 2 a 4 gotas por minuto. Si no se utiliza un lubricador, agregue 0,04 oz. (1,2cc, 12 a15 gotas) de aceite a la entrada de aire, dos veces al día. - Página 4 ISO 8662 DICHIARAZIONE DI CONFORMITA’ La Sioux Tools, Inc, con sede al 2901 Floyd Boulevard, P.O. Box 507, di Sioux City, Iowa, USA, dichiara sotto la propria e sola responsabilità che i prodotti 1450HP, 1451HP, 1452HP, 1453HP, 1454HP, 1455HP, 1456HP...
-
Página 5: Alimentation En Air
ISO 8662 DÉCLARATION DE CONFORMITÉ La société Sioux Tools Inc., située 2901 Floyd Boulevard, P.O. Box 507, Sioux City, IA 51102, dans l’Etat de l’Iowa (États-Unis), déclare sous sa seule responsabilité que les produits 1450HP, 1451HP, 1452HP, 1453HP, 1454HP, 1455HP, 1456HP visés par cette déclaration sont conformes aux normes ou aux documents normatifs suivants :... -
Página 6: Slang En Koppelingen
PN8NTC1 ISO 8662 CONFORMITEITSVERKLARING Ondergetekende, Sioux Tools, Inc., 2901 Floyd Boulevard, P.O. Box 507, Sioux City, Iowa, 51102, USA, verklaart met inachtneming van de eigen aansprakelijkheid desbetreffend, dat de producten 1450HP, 1451HP, 1452HP, 1453HP, 1454HP, 1455HP, 1456HP producten waarop deze verklaring van toepassing is, conform zijn met de hierna genoemde norm, normen en/of andere regels en voorschriften: EN 792 (voorstel), EN 292 onderdelen 1&2, ISO 8662, Pneurop PN8NTC1... - Página 7 ISO 8662 FÖRSÄKRAN OM ÖVERENSSTÄMMELSE Vi, Sioux Tools Inc., 2901 Floyd Boulevard, Box 507, Sioux City, Iowa, 51102, USA, förklarar under eget ansvar att produkterna 1450HP, 1451HP, 1452HP, 1453HP, 1454HP, 1455HP, 1456HP som denna försäkran gäller uppfyller följande standard eller standarder eller andra normgivande dokument:...
- Página 9 PARTS LIST FOR 1450HP, 1451HP, 1452HP, 1453HP, 1454HP, 1455HP, 1456HP DRILLS (SERIAL “B”) Fig. Part Fig. Part Description Description 2352 Ass’y—1/4" Hex Quick Change Adapter 63377 Ass’y—Planetary Reduction (1455HP, 21077 Chuck (0-1/4" Cap) 1455HPB) (1450HP, 1452HP, 1453HP, 1456HP) 64159 Carrier—Gear (1455HP, 1455HPB) 21133 Chuck (1/16"-3/8"...
- Página 10 MEMO...
- Página 11 MEMO...
- Página 12 Printed In U.S.A.