Mopar ProMaster 82214304 Instrucciones De Montaje página 3

10. Fasten the handle reinforcement bracket (1)
to the B-pillar using the M6x25 screws (6)
and torque to 9 Nm.
11. Cut out the template (3) along the outline
from the paper provided.
12. Place the template (3) on the back side of
the B-pillar cover, as shown, and mark the
hole locations.
13. Using a ¾" hole saw cut holes at the
marked locations.
08/06/2014
www.mopar.com
1
6
3
3
6
6
K6862098