14. Re-install the B-pillar cover and fasteners.
15. Attach the lower seat belt anchor, torque to
40 Nm, and replace trim cap.
16. Attach the upper seat belt D ring anchor,
torque to 40 Nm, and replace trim cover.
17. Install the seat belt D ring adjuster lever
cover.
18. Install the "Air Bag" logo cover into the B-
pillar cover.
19. Re-install the lower B-pillar cover and
fasteners.
20. Insert the M6x40 screw (5) through the B-
pillar handle (2) and handle spacer (4) on
both end of the handle and then into the
holes in the B-pillar cover.
21. Attach the B-pillar handle (2) to the handle
reinforcement bracket (1) using the M6x40
screws (5) and torque to 9 Nm.
22. Fold and place the I-Sheet in the vehicle's
glove box.
NOTE: For customer service questions, refer
to your Chrysler, Dodge, Jeep, Ram, or Fiat
dealership.
08/06/2014
www.mopar.com
5
2
5
5
2
5
4
4
4
K6862098