AbleNet iTalk4 Manual De Instrucciones

iTalk4
™
www.ablenetinc.com
(800) 322-0956
Getting Started
1. Insert 4 AA batteries (not included)
2. Turn iTalk4 On
3. Press and hold the record button until the record light
activates
4. Press and hold a switch top. Begin speaking into
recording microphone when you hear a beep. Release
when finished recording message.
5. Repeat for remaining switch tops
6. Press and release record button to exit record mode.
7. Optional: Select a different recording level to record a
second and third set of messages.
8. iTalk4 is now ready to use. Press and release desired
location to playback message
Recording Levels
iTalk4 provides three recording levels for increased
flexibility.
Use the toggle switch on the top of iTalk4 to select the
appropriate recording level. You can record separate
messages for each message location on each level.
Recording Levels
On/Off Switch and
Volume Control
Record
Speaker
Button
4 AA Batteries
RecordLight
(Not Included)
Controlling Toys and Appliances
The iTalk4 switch input/output jacks allow you to activate
switch adapted toys or appliance with this device.
1. Plug any switch-adapted toy or appliance into any of
the switch input/output jacks
2. Record a message into the corresponding location
3. Press the switch top to play the message and activate
the attached toy or appliance. The toy or appliance will
turn on for the length of the message.
Mounting
Use the AbleNet Universal Mounting Plate (sold separately)
hole pattern D to mount iTalk4 to any of AbleNet's mounting
systems. Threaded mounting holes are located on the
bottom of iTalk4.
Switch Input/
Output Jacks
Playing A Message With An External
Switch
iTalk4's switch input/output jacks default to controlling toys
and appliances. To use external switch(es) with iTalk4:
1. Turn iTalk4 off
2. Attach switch(es) of your choice with 1/8-inch (3.5mm)
plugs into the appropriate switch input/output jack(s)
3. While holding any external switch down, turn iTalk4 on
The toy/appliance control feature is disabled when using
an external switch(es). To revert to default toy/appliance
function, turn iTalk4 off and back on.
Switch Tops
Recording
Microphone
Speaker
PN 98000066 Rev A 04/19 FN 70500270
Updated April 5, 2019 9:38 AM