Loading The Dispenser - GE GXCC01D Manual De Uso Y Cuidado

Using the water dispenser.
1. Bottle Support Collar
2. Hot and Cold Power switches (back of
dispenser)
3. Indicator Lights
The indicator light will be lit when the
dispenser is plugged in. The lights will
heats and cools the water. Compressor
start is cycle on and off while the
dispenser delayed up to 3 minutes.
Specifications
Capacity: 3 or 5 gallon bottle
Chilling Rate: approx. 2 quarts per hour
Heating Rate: approx. 5 quarts per hour.

Loading the dispenser

IMPORTANT: Make sure the dispenser is
unplugged with both the hot and cold
power switches set to the 0 (off) position.
Before loading wipe
the top of the bottle
with a clean cloth
and wash hands.
Avoiding touching the
part of the bottle that
will be in contact with
the water dispenser.
4. Cold Water Dispenser Button
5. Hot Water Dispenser Button
6. Dispenser Drip Tray
7. Storage Cabinet (on some models)
The cabinet has an adjustable shelf that
can be used for cups or utensils. Do not
use to store foods requiring refrigera-
tion. The cabinet is not refrigerated.
Power Consumption: Heating - 420
Watts
Cooling - 85 Watts
1. Invert the bottle on top of the cooler and
place securely on the bottle support col-
lar.
2. Press the hot and cold dispenser but-
tons until water runs from both taps.
3. Plug in the dispenser.
4. Set the HOT (red) and COLD (green)
power switches to the I (on) position.
5. Allow 30 minutes for water to reach hot
and cold temperatures.
Contact a local water bottle distributor to
purchase water bottles.
12