Troubleshooting Tips - GE GXCC01D Manual De Uso Y Cuidado

Troubleshooting Tips

Problem Possible Causes
Water not hot enough Dispenser is unplugged.
or cold enough
The fuse is blown/circuit breaker is
tripped.
All the water in the water tank has
been used.
Temperature limiter tripped.
Water dispenser Empty water bottle.
does not work
Mineral deposits clogging tanks.
Water dispenser Crack or pinhole in bottle.
leaks from the
outside
Water dispenser is Water dispenser is uneven.
noisy
Bottle making a gurgling noise as
water fills the tanks.
Technical Specifications of Your Water Dispenser
Inlet Tension or
Nominal Tension (Volt)
Operation Frequency or
Nominal Frequency (hertz)
Nominal Power (Watt) or
Nominal Current (Ampere)
What To Do
• Push the plug completely into the outlet.
• Replace house fuse or reset the house circuit breaker.
• Wait 30 minutes for water to heat or cool.
• Set the cold and hot power switches to the 0 (off)
position. Wait five minutes, then set the switches to
the I (on) position. wait 30 minutes for water to heat
or cool.
• Replace with a new water of bottle.
• See Care and Cleaning.
• Replace with a new water of bottle.
• Make sure the water dispenser is installed on a level
floor or counter strong enough to support it when
fully loaded.
• This is normal.
115 V ~
60 Hz
4,7 A
15