Child Safety Dispenser Button
The HOT dispenser button is equipped
with a child safety switch that prevents hot
water from being dispensed accidentally
or by small children. To use the button,
slide the switch up and press the button in.
The dispenser heats water to a tem-
perature of approximately 190 °F
(88 °C). Water temperatures above 125
°F (52 °C) can cause severe burns or
death from scalding. Children, the dis-
abled and the elderly are at highest risk
of being scalded.
Care and cleaning of the dispenser.
Cleaning the Outside and Storage Cabinet
IMPORTANT: Set both power switches in
the 0 (off) position and unplug the water
dispenser before cleaning.
Cleaning the Condenser
IMPORTANT: Set the power switches in
the 0 (off) position and unplug the water
dispenser before cleaning.
Cleaning the Drip Tray and Grille
The dispenser drip tray is not self-clean-
ing. To reduce water spotting, the tray and
its grille should be emptied, cleaned and
wiped dry regularly.
Drip tray grille
Drip tray
Child Safety Switch
The inside and outside of the cabinet can
be washed with mild soap and water.
Rinse thoroughly with clear water. Never
use commercial cleaners or abrasive
scouring powders.
Sweep away or vacuum up dust from the
condenser coils on the back of the unit.
For best results use a brush specially de-
signed for this purpose. It is available at
most appliance stores.
Water left in the tray may leave deposits.
Remove the deposits by adding undiluted
vinegar to the tray. Soak until the deposits
disappear or become loose enough to
rinse away.
To remove, lift the grille and tray off the
dispenser. Remove the grille from the tray
to drain and clean.
To replace, place the grille back onto the
tray and slide the tray onto the guides at
the back of the drip area.
13