Motorola IMPRES NNTN7063 Guia Del Usuario página 10

09L67_IMPRES_MUC.book Page 8 Tuesday, December 29, 2015 11:43 AM
When troubleshooting, always observe the color of the LED.
Problem
No charger 1a. Charger contact is not
indication
1b. No power to the
Blinking Red 2a. Charger contact is not
Indication
2b. Battery is not charge-
Blinking 3.
Yellow
Indication
Table 2. Troubleshooting
What it means...
being made.
charger.
being made.
able.
Battery is waiting to
charge. The battery
temperature may be
below 5°C (41°F) or
above 40°C (104°F) or
the battery voltage may
be lower than the
predetermined
threshold level for rapid
charging.
8
What to do...
1a. Check that the radio with
battery, or the battery alone, is
inserted correctly.
1b. • Make sure that the power
cord is securely plugged into
the charger and an
appropriate AC outlet, and
that there is power to the
outlet.
• Replace fuses.
2a. Remove the battery from the
charger and replace it back
into the charger.
2b. • Verify that the battery is a
Motorola-authorized battery
listed in Table 4 . Other bat-
teries may not charge.
• Remove power from the
battery charger and, using a
clean dry cloth, clean the
gold metal charging contacts
of both the battery and the
charger.
• Replace battery.
3. When this condition is
corrected, the battery will
begin charging automatically.