Health & Safety; Electrical Supply; Environmental Conditions - Vision Engineering Mantis Guia Del Usuario

Health & Safety
Vision Engineering and its products conforms to the requirements of the EC Directives on Waste Electrical and Electronic
Equipment (WEEE) and Restriction of Hazardous Substances (RoHS).

Electrical Supply

Stand Input Voltage:
Power Supply Voltage (via plug top power supply) : 100-240VAC 50-60HZ 1.0A Max

Environmental Conditions

Indoor use
Altitude up to 2000m
Operating Temperature:
Storage Temperature:
Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C.
Mains voltage supply fluctuations not to exceed 10% of the nominal voltage
If equipment is not used in a manner as specified, protection provided by the equipment may be impaired.
The product should be located such that the Power Supply can be unplugged in the event of an emergency.
9VDC 1.7A
0°C - +40°C
0°C to + 50°C for 3 months without any adverse effects