Maintenance And Storage; Safety Of Others; Warning Symbols - Black and Decker EMax34i Traducción De Las Instrucciones Originales

The motor will continue to run for a few seconds after
u
switching the appliance off. Never attempt to force the
blade to come to a standstill.

Maintenance and storage

Before use, check the appliance for damaged or defective
u
parts. Check for misalignment and seizure of moving
parts, breakage of parts, damage to guards and switches
and any other conditions that may affect its operation. En-
sure that the appliance will operate properly and perform
its intended function. Never use the appliance when any
guard or enclosure is damaged or not in place. Do not use
the appliance if any part is damaged or defective. Do not
use the appliance if the switch does not turn it on and off.
Have any damaged or defective parts repaired or replaced
by an authorised repair agent.
Check the cable frequently for damage. If the cable is
u
damaged, it must be replaced by an authorised repair
agent in order to prevent a hazard. Inspect extension
cables periodically. Replace a damaged extension cable
immediately.
Keep all nuts, bolts and screws on the appliance tight to
u
ensure a safe working condition.
Check the grass collector for wear or damage and replace
u
it if necessary. Never use the appliance without the grass
collector.
Be careful during adjustment of the machine to prevent
u
entrapment of the fingers between moving blades and
fixed parts of the machine.
When servicing the blades be aware that, even though
u
the power source is switched off, the blades can still be
moved. .
When not in use, the appliance should be stored in a dry
u
place. Children should not have access to stored appli-
ances.
Always allow the machine to cool down before storing.
u
Ensure that only replacement cutting means of the right
u
type are used.
Use only Black & Decker recommended spare parts and
u
accessories.
Additional safety instructions for Lawnmowers
This appliance is not intended for use by persons (includ-
u
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not
u
play with the appliance.
If the supply cord is damaged, it must be replaced by the
u
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
(Original instructions)
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any moving parts.
u
Injuries caused by touching any hot parts.
u
Injuries caused when changing any parts or accessories.
u
Injuries caused by prolonged use of the appliance. When
u
using any appliance for prolonged periods ensure you
take regular breaks.

Safety of others

This appliance is not intended for use by persons (includ-
u
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not
u
play with the appliance.

Warning symbols

The following warning symbols are found on the appliance:
Warning! Read the manual prior to operation.
R
Do not expose the appliance to rain or high
humidity.
Always remove the plug from the socket before
inspecting a damaged cable. Be careful not to
use your appliance if the cable is damaged.
K
Beware of flying objects. Keep bystanders away
from the cutting area.
Beware of sharp blades.
Keep the cable away from the cutting blades..
The blades will continue to rotate after the
machine is switched off.
ENGLISH
3