Troubleshooting - Black and Decker EMax34i Traducción De Las Instrucciones Originales

ENGLISH
Cable storage (fig. O)
The cable holders (6) provide a safe and convenient way to
store the cable (31) when not in use.
Wrap the cable around the cable holders (6) in a figure of
u
eight pattern.
Carrying the mower
Warning! Ensure the blade has completely stopped and
disconnect the appliance from the mains.
The mower can be carried using the convenient carry
u
handles (12).
Hints for optimum use
If the grass is longer than approximately 10 cm, make two
u
cuts to obtain a better finish. First mow at maximum height
of cut, then use a low or medium height of cut.
In order to achieve optimum results, only mow dry grass.
u

Troubleshooting

If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local Black & Decker repair agent.
Warning! Before proceeding, remove the plug from the
socket.
Problem Possible Cause
Machine fails to
Power turned off
operate
Fuse faulty/blown
Grass too long
Thermal cut out
activated
Thermal cut out
Machine functions
activated
intermittently
Machine leaves
Height of cut too low
ragged finish or
motor labours
Cutting blade blunt
Underside of machine
clogged
Blade fitted upside
down
4
(Original instructions)
Possible solution
Turn power on
Replace fuse
Increase the height of
cut and move machine
to shorter grass to start
Allow motor to cool and
increase height of cut
Allow motor to cool and
increase height of cut
Increase height of cut
Replace the blade
Check underneath the
machine and clear out
as necessary (always
wear heavy duty
gloves)
Refit blade correctly
Technical data
EMax34s
EMax34i
Type 1
V
Voltage
AC
W
Power Input
-1
min
No-Load Speed
mm
Height adjustment
mm
Blade length
kg
Weight
Hand/arm weighted vibration value according to EN60335:
= 3.2 m/s , uncertainty (K) = 1.5 m/s
2
EMax38i EMax42i
EMax42ri
Type 1
Type 1
230 230 230
1400 1600 1800
3500 3500 3500
200-700 200-700 200-700
340 380 420
11 12 12.6
.
2