Miniland DIGIMONITOR 3.5 TOUCH Manual De Instrucciones página 32

ENGLISH
2. Select the BABY MONITOR option on the main menu.
3. Select digimonitor 3.5" touch from the different models of baby monitor.
4. Click on the PLAY
Mobile browser
You can also view the camera image by accessing the eMyBaby website via the browser on your mobile device.
This option will be particularly useful if your mobile device is not iOS or Android.
1. Access the eMyBaby (www.emybaby.com) website on your browser using your username and password.
Select the BABY MONITOR option on the main menu.
2. Select digimonitor 3.5" touch from the different models of baby monitor.
3. There are two options to choose from. Choose "View from anywhere through another computer, tablet or
smartphone, tablet or smartphone".
4. Click on the Receive signal button. If everything is working correctly you should automatically see your baby
on your mobile screen.
5.3. TROUBLESHOOTING
Problem
No reception on the
monitor
No images are displayed
but sounds are heard
Only black and white
images are displayed
You cannot hear the
parent's voice in the
baby unit
The camera does
not transmit
You cannot hear the
baby on the parent unit
Interference or poor
reception
icon to see the image captured by the camera on your mobile device.
Possible Cause
Camera not turned on
Monitor not turned on
Camera: not plugged in to the
power adapter
Monitor: The power adapter is
not plugged in or the battery is
low (check LED)
The VOX mode or the MD mode
are active
Monitor out or range
Connection lost between the monitor
and a camera already linked
Low monitor battery power
(check LED)
Check whether the camera is in
night vision/infrared mode
The volume setting of the baby
unit is too low. The camera is not
turned on
Camera: the power adapter is not
plugged in
VOX mode or MD mode are active
The volume setting of the parent
unit is too low
The sensitivity setting of the baby
unit is too low
Other electronic devices may be
interfering with the signal
The camera and monitor may be too
far apart
The battery power may be too low
The camera or monitor may be placed
too close to many metal objects
Solution
Press and hold down button (III) for 2
seconds
Press and hold down the power button (6)
Plug in the power adapter
Plug in the power adapter or charge the
battery
To see the monitored area continuously,
disconnect the VOX or MD mode on the
monitor.
Move the monitor closer to the camera
Move the monitor closer to the camera
Plug in the power adapter or charge the
battery
To see images in color, increase the light
level where the camera is located
Set the volume to the highest level
Press and hold down button
(III) for 2 seconds
Plug in the power adapter
To see the monitored area continuously,
disconnect the VOX or MD mode on the
monitor
Set the volume to the highest level
Increase the sensitivity setting in the baby
unit
Move them away from the device
Move the monitor closer to the camera
Plug in the power adapter
Move them away from the device
32