Daily Switch-On - LaCimbali S/200 Manual De Instalación

Tabla de contenido

Publicidad

English
1
31
30
PROG
29
MILK
Lift the display panel (4) to access the programming keyboard and the master switch (23).
DESCRIPTION OF THE COMPONENTS
8
Dallas key sensor
23
Master switch
24
RESET key
25
EXIT key (to quit programming)
"Before switching on the machine, ensure that the electrical
!
mains switch is connected and that the water mains tap is
open"
MANUAL SWITCH-ON
Press the master switch (23). The machine is switched on and the one
of the following is displayed
ESPRESSOTIME
Monday
12:30
When the coffee dispensing key is pressed, the drink is delivered at the
temperature reached at the moment of delivery.
When the hot water, cappuccino or milk delivery keys are pressed, the
drinks are not distributed until the programmed temperature has been
reached.
During the heat-up phase, if other messages are displayed (e.g. "boiler
refill", etc., follow the instructions in the chapter "MESSAGES".
AUTOMATIC SWITCH-ON
(Only if the CLOCK function is activated)
The machine switches on automatically at the programmed time.
The messages displayed and the operations performed by the machine
are described in the paragraph " MANUAL SWITCH-ON".
1. Display Panel (4)
MM
2
MP
MG
-
+
28
27
26

2. Daily Switch-On

ESPRESSOTIME
Machine cold
Please wait
MR
G
RESET
EXIT
COFFEE
25
24
26
Coffee circuit wash key
27
Counter display key
28
Milk circuit wash key
29
"PROG" key (access programming)
30
"+" and "-" keys (change parameters/clock)
31
"
N.B. When the machine is working in automatic on/off, do not use the
master switch (23) to switch off the machine because otherwise it will
not be able to switch on automatically.
FORCED SWITCH-ON
The following is displayed during the programmed switch-off phase:
ESPRESSOTIME
Machine OFF
ON: press RESET
ESPRESSOTIME
Monday
OFF: press RESET
N.B. This message will not be displayed the next time the machine
switches on automatically.
0 1
23
" key (change language and move cursor)
Keep the RESET key (24) pressed
for a few seconds for a forced
switch-on.
N.B. Forcing the machine to switch
on
does
not
programmed on/off times.
This message is displayed when
the machine is in forced switch-on.
Keep the RESET key (24) pressed
for a few seconds. The machine
12:30
switches off and will switch on
automatically
programmed time.
English
8
change
the
at
the
next

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

S/100C/100C/200

Tabla de contenido