Start-End Operations Programming - LaCimbali S/200 Manual De Instalación

English
Press one of the cappuccino
dispensing keys (the associated
led will remain lit and not flash).
This message will be displayed:
Press one of the hot water
dispensing keys. This message
will be displayed:
The following is displayed:
5.2 Selection Programming – Cappuccino
Selection xx
1 Capp. MM2
Water dose 100
Coffee dose 2,0
5.3 Selection Programming – Hot Water
Selection xx
Water
Time water 10,0

6. Start-End Operations Programming

Time ON 3:00
Time OFF 3:00
Closing day
None
To vary the water dose (fan pulses) use keys "+" and "-" (30).
To vary the coffee dose (grinding time) first press key "
then move the flashing cursor (arrow) to the bottom line, then press
keys "+" and "-" (30).
When key " " (31) is pressed again, the line "Milk time" will be
displayed (highlighted by a flashing cursor). Press keys "+" and "-"
(30) to change the parameter.
To vary the water dose (dispensing time) use keys "+" and "-" (30).
To change the ON time use keys "+" and "-" (30).
To change the OFF time first press key "
flashing cursor (arrow) to the bottom line, then press keys "+" and "-
" (30).
When key " " (31) is pressed again, the flashing cursor will
position itself on the closing day (None). Press keys "+" and "-" (30)
to change this parameter (Monday, Tuesday, etc.).
N.B. If the automatic ON/OFF function is not required and the machine
is to be switched on manually, set "Time ON" and "Time OFF" to the
same time.
English
" (31)
" (31) then move the