Cleaning, Care & Maintenance; Fitting/Removing The Heating Plate; Troubleshooting - Olympia CC909 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)
Cleaning, Care & Maintenance
• Always turn off and disconnect the appliance from the power supply before cleaning.
• Use soapy water and a damp cloth to clean the exterior of the appliance.
• DO NOT immerse the appliance in water.
• The inner bowl can be removed and cleaned with warm, soapy water.
• At no point must the heating plate come into contact with water.
• Dry thoroughly after cleaning.

Fitting/Removing the Heating Plate

Disconnect the appliance from the power supply
1.
and allow to cool.
WARNING: Failure to allow the appliance
to cool could result in burns!
Remove the inner bowl.
2.
Lift the lid/outer pan section from the frame and
3.
place gently on it's side.
Unscrew the four nuts securing the heating plate to
4.
the underside of the appliance and remove the
heating plate.
Fitting is a reversal of the above procedure.
5.

Troubleshooting

Fault
The unit is not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Foodstuffs do not Heating plate has become loose
stay warm
No water in outer pan
Lid not fully closed
Probable Cause Action
Check the unit is plugged in correctly and switched
on
Call OLYMPIA agent or qualified technician
Replace the plug fuse
Check power supply
Call OLYMPIA agent or qualified technician
Disconnect from power supply. Allow heating plate
to cool and tighten nuts
Fill outer pan with HOT water no higher than MAX
level
Close lid
UK
2