Technical Specifications; Electrical Wiring; Compliance - Olympia CC909 Manual De Instrucciones

UK

Technical Specifications

Model Voltage
CC909 230V 50Hz

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 3 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.

Compliance

The WEEE logo on this product or its documentation indicates that the product must
not be disposed of as household waste. To help prevent possible harm to human
health and/or the environment, the product must be disposed of in an approved and
environmentally safe recycling process. For further information on how to dispose of
this product correctly, contact the product supplier, or the local authority responsible
for waste disposal in your area.
OLYMPIA parts have undergone strict product testing in order to comply with regulatory
standards and specifications set by international, independent, and federal authorities.
OLYMPIA products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of OLYMPIA.
Every effort is made to ensure all details are correct at the time of going to press, however, OLYMPIA reserve the
3
Power Current
400W 0.6A
right to change specifications without notice.
Capacity Weight
9 litres 5kg
Dimensions
h x w x d mm
315 x 590 x 350