Relay Terminals - Danfoss VLT Compressor Drive CDS 803 Guia De Funcionamiento

VLT® Compressor Drive CDS 803
Operating Guide
2. Connect the ground cable to the ground terminal, then connect the compressor to terminals U, V, and W.
Table 6: Connection of Compressor to Terminals
Drive terminals
U
V
W

3.2.3.5 Relay Terminals

Relay 1
• Terminal 01: Common.
• Terminal 02: Normally open.
• Terminal 03: Normally closed.
Relay 2
• Terminal 04: Common.
• Terminal 05: Normally open.
• Terminal 06: Normally closed.
Danfoss A/S © 2021.06
Compressor
T1
T2
T3
AQ32174876762701-000301 / 130R0627 | 19
Installation