Maintenance And Cleaning - AneX Quant Manual De Instrucciones

EN
10
AA batteries. To install/replace the batteries, you need to unscrew the
cover on the frame, install the batteries, and then tighten it again.
To turn on the backlight, press the button on the stroller frame (Fig. 49).
The backlight has 2 lighting modes and the self-automatic shutdown
function after 2 hours from the moment of switching on. Attention! Do
not let electrical parts, lighting in particular, get into water.
CAR SEAT
The child car seat can be mounted on this stroller's frame as well. It
must be attached to special adapters for frame and separate adapters
for the car seat (Fig. 51). To secure the removable child car seat, insert
the adapters into the adapter pockets on the frame. The adapters are
blocked automatically. To remove the adapter from the frame, press the
memory buttons of the adapters (Fig. 52). The car seat can be installed
with the standard car safety belts. Please carefully read the manual
instruction before using the car seat.
INSTALLING ADDITIONAL ACCESSORIES ON THE FRAME
The frame is equipped with a unique fastening system for the branded cup
holder TM Anex. To attach them, you only need to apply the cup holder to
a bracer and pull it down until you hear a distinctive fixation sound (Fig.
50). In addition, the stroller is equipped with a shopping basket, which is
attached to the bottom of the frame with a zipper and Velcro.

MAINTENANCE AND CLEANING

Please ensure that the stroller is kept clean and dry (both the coating
and the frame). In case the stroller gets dirty or wet, it should be dried,
and the metallic parts be cleaned with a dry cloth. Avoid getting dirt
(sand, dust, etc.) on the stroller. Clean the dirt off the stroller as soon
as possible. Please note that if you do not do so, the product can stop
functioning either partially or fully.