Maintenance And Cleaning - AneX Cross Manual De Uso

unit adapters are blocked automatically.To dismount the
seat unit, press the buttons of the seat unit adapters, while
lifting it up (fig. 25). The seat unit's backrest can be adjusted
to the desired height using the adjuster located on the seat
backside (fig. 26).
SEAT UNIT HOOD, FEET COVER
EN
The seat unit is equipped with the folding hood that
protects a child from natural phenomena (wind, sun,
snow, rain). The hood position is adjusted by pressing
on its upper part with your hands (fig. 27). The seat
unit is equipped with the feet cover, which is fixed
with buttons on the both sides of a stroller in its front
part (fig. 28). The seat unit`s hood can be ventilated
by unfastening a zipper at the top of the hood and
pulling the top of the hood to the bumper side (fig. 28).
FOOTREST ADJUSTMENT
To adjust the desired hight simultaneously press the
buttons located on both sides of the footrest (fig. 29).
SEAT UNIT`S BUMPER
Every seat unit has a bumper with a protective mechanism
which prevents a child from getting out of a stroller.
Simultaneously press two parallel red buttons on the both
sides of a handle, adjust the desired height (fig.30).
To dismount the bumper press buttons and pull the handle
up slightly (fig. 31). For bumper mounting insert it into the
latching mechanisms, which are situated on both sides of the
seat unit (you should hear a specific sound) (fig. 31).
SAFETY BELTS
The seat unit features 5-point safety belts. To secure a
child with safety belts, insert the belt locks into the holder
and tighten those belts (fig.32). To unfasten the belts, press
the button and remove the locks out of the holder (fig. 32).
CHILD SAFETY SEAT
The child safety seat can be mounted on the stroller's
frame as well. It must be attached to specially made adapters
(fig. 33). To secure the removable child safety seat, insert the
adapters into the adapter pockets on the frame (fig. 33), then
secure it (fig. 34). The adapters are blocked automatically.
To remove adapters press the button on the inner side
(fig. 35).The child safety seat equipped with a feet cover
fastened with buttons to the body of a child safety seat
(fig. 34); it has child safety belts as well. To remove child
safety seat from a frame press buttons on both sides of
a seat simultaneously (fig. 36). Our safety seats can be
mounted in a car both with a standard car seat belts or
ISOFIX locking system.

MAINTENANCE AND CLEANING

Make sure this stroller always stays dry and clean
(both its upholstery and its frame). There's no need to
remove the stroller's upholstery. This stroller's upholstery can
be cleaned with a damp sponge or a cloth using a detergent.
It is necessary to control the degree of wear of the wheels
and clean them from the dust and the sand. When lubricating
the wheel axle drop a few drops of oil between the axle and
the hub. If the stroller gets wet, it should be dried and its
metal parts should be wiped with the dry cloth. The colors
of this stroller materials and fabrics can undergo changes as
a result of prolonged exposure to sunlight.