KTM 60103923050 Guia De Inicio Rapido página 4

2
1
4
Scope of supply:
1x base plate (1)
4
1x clamping part (2)
4x countersunk screws DIN7991-M4x16-8.8 (3)
3x grub screws DIN913 M5x10 (4)
3
- Screw the grub screws (4) into the clamping part (2) (Figure A).
A
- Position the base plate (1) under the side stand (Figure B).
B
- Position the clamping part on the base plate (Figure C).
C
NOTE:
To avoid fastening the side stand foot in a skewed position, keep the weight
of the motorcycle off the side stand while screwing the foot in place.
- Insert the countersunk screws (3) (Figure D) and tighten (3Nm, Loctite243).
- Tighten the grub screws (6Nm, Loctite243).
Check for tightness at regular intervals.
D
0991040163
0913050100