KTM 69008915033 Guia De Inicio Rapido página 5

2
1
4
9 10
12
8
11
13 14 15
Scope of delivery:
1x license plate holder assembly
1x turn signal, left
1x turn signal, right
Preparations
3
- Remove the seat.
- Detach connectors (1) and (2).
- Remove screws (3) and take off the license plate holder.
Carefully insert the connector (2) through the opening toward the back.
3
- Take apart the license plate holder.
6
- Disconnect the plug-in connectors (4) and (5).
- Remove the original license plate lamp (6).
5
Assembly
- Mount the license plate support (7) and the arm (8) using the M6x12 col-
lar screws (9) (included) and the toothed washers (10) (included).
7
- Mount the license plate holder with the original M6x20 (11) and M6x25
(12) screws.
- Mount the original license plate lamp (6) using the M5x14 screw (13) and
M5 nut (14) + washer (15) (included).
- Mount the left and right turn signals (included) with the M8 nut (16) (inclu-
ded with the turn signal).
6
16
1x arm
1x license plate holder
1x plate for reflector
1x hexagon nut M5
1x cap head screw M5x14
2x toothed washers 6.4
2x collar screws M6x12
1x washer A5.3
6x cable binders 98x2.5mm
1x intermediate wiring harness
69008915044
0985050003
091205014
0797060000
0025060126
0021050003
69012935000
69014926000
69014925000
5