Valex T500 Instrucciones Para El Uso E Instrucciones De Seguridad página 8

g
T OOL GENERAL SAFETY WARNINGS
! IMPORTANT! Read all the warnings and instructions.
Failure to comply with the warnings and instructions may
cause electric shock, fire and/or serious injuries.
Strict observance of these warnings with the use of personal
protective equipment minimizes risks of accidents but does
not completely rule them out.
Keep all the warnings and instructions for future reference.
The term "electrical tool" in the warnings refers to the machine
tools operated by means of (wired) connection to the electric
power supply or battery (wireless).
These instructions refer to an electrical tool manufactured in
numerous models and versions; read the instructions carefully
and apply them to your electric tool.
1) Safety in the work area
a) Keep the work area clean and well lit. Overcrowded and/or
badly lit areas may cause accidents.
b) Do not operate electrical tools in explosive atmospheres,
e.g. in the presence of inflammable liquids, gases or powders.
Electrical tools create sparks that may ignite powders or fumes.
c) Keep children and passers-by at a distance when operating
an electrical tool. Distractions may cause you to lose control
of the tool.
d) Keep the nylon packaging bags in a safe place. Bags can
cause suffocation and must be kept out of the reach of children.
e) Use the tool in a well-ventilated place. Ventilation is ne-
cessary for cooling the tool and for eliminating air impurities
produced when working.
f) Do not operate electrical tools outdoors in the presence of
rain, fog, storms, high or low temperatures, or in damp or wet
environments. Use in these conditions may cause electrocution.
2) Electrical safety
a) The electrical tool plug must correspond to the socket.
Never modify the plug in any way. Do not use adaptors with
earthed electrical tools. Unmodified plugs and suitable sockets
reduce the risk of electric shock.
b) Do not allow the body of the tool to come into contact
with earthed surfaces such as pipes, radiators, cookers
and refrigerators. If your body is earthed, the risk of electric
shock increases.
c) Do not expose electrical tools to rain and do not use them
in wet environments. Water permeating into an electrical tool
increases the risk of electric shock.
d) Do not let the cable become worn. Never use the cable to
transport, pull or disconnect the electrical tool from the power
supply socket. Keep the cable away from heat, oil, sharp
edges or moving parts. Damaged or twisted cables increase
the risk of electric shock.
e) When using an electrical tool outdoors, use an extension
cable suitable for outdoor use. The use of a suitable cable
reduces the risk of electric shock.
f) Use an electric power supply protected by a differential
switch (RCD). The use of a suitable residual current device
(RCD) reduces the risk of electric shock.
g) The power supply must correspond to that indicated on
the electrical tool. An unsuitable power supply generates
malfunctioning and accidents.
h) Frequently check the power supply cable. Do not crush or
tread on the power supply cable. A damaged cable causes
electric shock. If it is damaged, unplug the electrical tool and
do not use it.
- 8 -
i) For any doubts in the electrical field please contact a qua-
lified and experienced technician. The unsafe use of electricity
is very dangerous for yours and other people's safety.
3) Personal safety
a) Never allow yourself to be distracted. Control what you are
doing and use your common sense when using electrical tools.
Never use the tool when you are tired or under the influence of
drugs, alcohol or medicines. A moment of distraction when using
electrical tools could cause serious personal injuries.
b) Use personal safety equipment. Always wear eye pro-
tection. Protection equipment such as dust repelling masks,
anti-slip safety shoes, safety helmets, gloves or ear protections,
reduces the possibility of personal injuries.
c) Prevent switching the tool on accidentally. Make sure that
the switch is in the off position before connecting the tool to
the electric power supply and/or to battery units and before
taking or transporting it. Carrying electrical tools with your
finger on the switch or connecting them to the electric power
supply with the switch in the on position can cause accidents.
d) Remove any adjustment wrench before switching on the
electrical tool. Any key or spanner left attached to a rotating part
of the electrical tool may cause personal injuries.
e) Do not lose your balance. Always keep an appropriate
position and balance. This allows better control of the electrical
tool in unexpected situations.
f) Wear appropriate clothing. Do not wear loose clothing or
jewellery. Keep hair, clothing and gloves away from moving
parts. Loose clothing, jewellery or long hair may get entangled
in the moving parts.
g) If any devices to be connected to dust extraction and
collection systems are provided, make sure that they are
connected and used appropriately. The use of these devices
may reduce the risks connected with dust.
h) The user is responsible for other people as far as accidents
or damage to people or property are concerned. Improper use
causes accidents and damages.
i) Never use with bare or wet feet/hands. Use in these condi-
tions may cause electrocution.
l) Processing of harmful materials must be performed in
compliance with the laws in force. Some types of dust and
materials such as metals, wood, paints, etc. are very harmful
to health. Protect yours and other people's health using suitable
protections and devices.
m) Do not approach the cooling air ejection slots. The air
generated may contain machining residuals and small parts that
are harmful for your respiratory tracts and eyes.
n) Do not cover or insert things in the cooling slots. Unsuitable
ventilation of the electrical tool may start a fire. Accessing the
internal parts may damage the tool and cause electrocution.
o) Do not use the electrical tool if the guards (screens, panels,
doors etc) are open, damaged or missing. Correctly installed
guards protect your health and allow safe use.
p) For electrical tools equipped with a laser indicator: do
not stare at the light beam, do not point the beam at people,
animals or vehicles and do not point the beam at eyes or
skin. Improper use of the laser causes serious damage to
sight and skin.
4) Use and maintenance of electrical tools
a) Do not force the electrical tool. Use a suitable tool for the
operation to be carried out. An appropriate electrical tool can
perform the work with higher efficiency and safety without having
to exceed the parameters intended for its use.
b) Do not use the electrical tool if the on/off switch is not
activated properly. Any electrical tool that cannot be controlled
by its switch is dangerous and must be repaired before use.
c) Disconnect the plug from the power supply and/or from the