KTM 93007955100 Guia De Inicio Rapido página 4

4
Scope of supply
1x seat cover
1x seat fairing
1x pad for seat cover
4x screw M5x12
2x collar screw M5x12
2x rubber support
2x silicone grommet
Preassembly
- Drill mounting holes with a diameter of 8 mm (pre-drill to 3 mm)
using the relevant drill.
- Drill mounting holes with a diameter of 10 mm (pre-drill to
5 mm) using the relevant drill.
- Mount rubber supports (included).
- Mount silicone grommets
- Position pad on seat cover
- Mount and tighten screws
- Position seat fairing on seat cover
Pins are seated in the silicone grommets
- Mount and tighten screws
Assembly
- Install the passenger seat (see the owner's manual).
(included).
(both included).
(included).
.
.
(included).