TTM BIG 200 Professional Manual De Instrucciones página 4

Menu setting:
Press SET in on hook mode, LCD will show VIEW MENU ↑↓,choose the menu by
pressing UP or DOWN key. Press SET again to enter the selected menu:
Select Language
Press SET. Scoll to "SELECT LANGUAGE" by pressing UP or DOWN key. There are
7 languages for choice: English/French/Spanish/Italian/German/Turkish/Danish, with
English as the default. Choose the desired language by pressing UP or DOWN key.
Set area code
Press SET, Scoll to "SET AREA CODE" by pressing UP or DOWN key. Press to
confirm, LCD will show------,with the first"-" blinking if there is no code set before. If
there is code, LCD will show the numbers, and the first number will blink.
Press UP or DOWN key to input the digit. Go to the next digit setting by pressing
SET. There are 5 digitals that can be set. Confirm the setting and go to next by
pressing SET.
Long distances
Press SET. Scroll to "LONG DIST ACCESS" by pressing UP or DOWN key. LCD will
show------,with the first"-" blinking, if there is no code set before. If there is A code.
LCD will show the numbers, and the first number will blink. Press UP or DOWN key
to input the digit. Go to the
Next digit setting by pressing SET There are 6 digitals that can be set. Confirm the
setting and go to next by pressing SET
Date/ Time
Press SET. Scroll to " DATE/TIME" by pressing UP or DOWN. After entry, the year
will be blinking. Modify it by UP or DOWN then go to the next time setting by pres-
sing SET. After setting the date and time, LCD will show the corresponding week. All
the information will update automatically if the incoming call is FSK type.
Contrast adjust
Press SET. Scroll to "CONTRAST ADJUST" by pressing UP or DOWN. Press SET
to enter this menu. LCD shows the current contrast, Choose the desired level by
pressing UP or DOWN.
Baby call
Press SET. Scroll to "BABY CALL" by pressing UP or DOWN. Press SET to enter
this menu. LCD shows the current state, switch on or off by pressing UP or DOWN.
When you choose on press SET to confirm. LCD shows BABY CALL NUMBER, indi-
cating user to input the baby call's number. After inputting the desired number, press
SET to confirm. The default setting is "BABY CALL OFF".
When the desired baby call number is programmed into the phone and the function
is set to "ON", pressing any key on the phone (except the SET key) or lifting the
handset, will dial the baby call number automatically.
Ring Melody
Press SET. Scroll to " RING MELODY" by pressing UP or DOWN . Press SET to
enter this menu. LCD will show the current ring. Choose the
desired ring by pressing UP or DOWN. If you choose the C1 option, this menu will be
shielded.
Phonebook input
Press SET. Scroll to "PHONEBOOK INPUT" by pressing UP or DOWN press SET
to enter this menu. LCD will prompt to input number. After inputting numbers, press
SET to save and start inputting name. Move the cursor by UP or DOWN keys when
editing name, and delete the wrong content by DEL. After name is edited, press SET
to confirm and go to the next.
Phonebook edit
Press SET. Scroll to "PHONEBOOK EDIT" by pressing UP or DOWN. Press SET to
enter this menu. LCD will prompt to input the name to search the desired item, or just
view all the items by pressing UP or DOWN. Then press SET to edit the item, the
operation is the same as PHONEBOOK INPUT.
Flash time
Press SET. Scroll to "FLASH TIME" by pressing UP or DOWN. There are 4 flash
time for choice : 100ms/300ms/600ms/1000ms. The default time is set by the option.
Choose the desired time by pressing UP or DOWN.
Operation in on hook mode:
Incoming call's display
When receiving an incoming call, phone will show the information of this call, such
as name, date and time, and record the total number of all incoming calls. If the call
is DTMF signal, phone will put its date & time to this call, due to that there is only
number but no other information taken with the signal. If no name has been sent out
by exchange, LCD will show the name if the phonebook have the same number.
If it is the new incoming call, there will appear a "NEW" icon on LCD; If it's not, then
"REP" icon appears at the same time. If it's a private call, LCD will indicate PRIVATE
CALL. And OUT OF AREA will display on LC if the call is out of area, and ERROR if
the CLI DATA is not correct.
Review the incoming calls
Review the incoming calls by pressing UP or DOWN in the idle mode, it will display
all the information such as number, date and time of the calls. Pressing UP or
DOWN more than 2s can change the item quickly.