Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Draw end of bunch with green and brown cables to right standing lights, disconnect 4-input joint and connect it
with suitable join of electric bunch. Connect remaining joint of electric bunch to standing lights.
7.
Draw end of bunch with green and brown cables to left standing lights, disconnect 4-input joint and connect it with
suitable join of electric bunch. Connect remaining joint of electric bunch to standing lights.
8.
Only for 13-polar set. Clip one quick joint on vehicle cable feeding reversing lights and connect it to black/red
cable of connection bunch.
9.
Connect white cable to earth (e.g. drill a 3 mm hole, connect and fix the eyelet terminal with sheet metal screw; do
not secure the hole with anti-corrosion agent).
10.
Draw part of bunch with blue and grey cables to vehicle bunch. Cut vehicle cable feeding fog lights in an easily
accessible place, put jackets shrinking under high temperature on ends of cables in such a way, that the end is
located in the middle of the jacket's length and then heat the jackets on the cable using either a singeing machine or
a lighter.:
a) Clip quick joints on both ends of cables,
b) Connect quick joint clipped on cable running from fog lights switch to blue cable from connection bunch,
c) Connect quick joint clipped on cable running from fog lights to grey cable from connection bunch.
11.
Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow and brown/green leads) is provided for expanded
socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the
following parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
part no. 014-169
part no. 015-069
Publicidad
