Start Up; Anti-Static System; Dry Vacuum Cleaning - Flex VCE 35 L AC Manual De Instrucciones

Do not use the appliance without the
–
complete filtering system.
Please follow the safety regulations ap-
–
plicable to the materials that are to be
treated.

Start up

The appliance allows 2 operating modes:
1 Industry vacuum cleaner mode (socket
not used)
2 Dedusting mode (socket used)
 Connect the suction hose and insert in-
sert the suction nozzle or connect to the
dust-generating device depending on
the operating mode.
Warning
Do not vacuum without the filter elements;
otherwise, the suction motor can get dam-
aged and this can be hazardous to health
on account of increased release of fine dust
particles.

Anti-static system

Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks with attachments with electro-
statically grounded accessories included in
the delivery.

Dry vacuum cleaning

The device is fitted with a paper filter
–
bag with locking slide, order no.
296.961 (5 pcs).
The appliance is equipped with a dis-
–
posal bag with locking slide and locking
strip, order no. 340.766 (10 pc).
Note:You can use this appliance to vacu-
um all types of dust up to dust class L. It is
statutorily necessary to use a dust collec-
tion bag (see Filter systems for order
number).
Note:The appliance is suited as industrial
vacuum cleaner and as dedusting device
for the mobile operation to take up dry, non-
combustible dusts with MAK values greater
than or equal to 1 mg/m .
3
EN
Caution
The flat pleated filter must must always be
in place while vacuuming.
To suck fine dust, you can also use an ad-
–
ditional paper filter bag or disposal bag.
Inserting the paper filter bag
Illustration
 Release and remove the suction head.
 Insert the paper filter bag.
 Insert and lock the suction head.
Installing the dust disposal bag
Illustration
 Release and remove the suction head.
 Attach disposal bag.
 Pull disposal bag over the container.
 Insert and lock the suction head.
Wet vacuum cleaning
Warning
No dusts hazardous to health should be
sucked in during wet vacuuming.
Remove the paper filter bag
Illustration
 Release and remove the suction head.
 Pull the paper filter bag out towards the
rear.
 Pull the locking slide up and seal the pa-
per filter bag tightly when removing it.
 Dispose of the used paper filter bag ac-
cording to the local provisions.
 Insert and lock the suction head.
To suck wet dirt, first remove the paper
–
filter bag.
Removing the dust disposal bag
Illustration
 Release and remove the suction head.
 Put the disposal bag over.
 Pull the opening of the disposal bag out
toward the back over the suction sup-
port and seal it tightly.
 Tightly seal the disposal bag with clo-
sure strips underneath the opening.
 Remove disposal bag.
 Dispose of the used disposal bag ac-
cording to the local provisions.
– 3
17