SIARR
18 - 35
PREPARATION
* Remove the vehicle's rear bumper.
* Remove the bumper brackets.
* Remove the tow bar fastenings except the head marked (check its torque).
* Make a cut at the bottom center of the bumper (Fig.1).
ASSEMBLY
* Position and fasten the tow bar in the bumper at the same fixing
point V as the old brackets with fastening kit V and tighten the
nuts, bolts and screws to the torque indicated below.
* Inside the boot :
° Remove the tape blocking the 2 end holes marked Y
opening into the longitudinals.
° Remove the tape blocking the holes marked W on the rear plate of the vehicle.
* Fit the "tow bar + bumper" unit into the vehicle's longitudinals.
* Inside the boot, position the strengthening pieces (marked B and C).
* Fasten the tow bar to the points marked W using fastening kit W.
*Fasten the tow bar to the points marked X using the existing
fastenings and to the points marked Y using fastening kit Y.
* Fasten the electrical plus support to the points marked U using fastening kit U.
FINISHING
* Tighten all of the nuts, bolts and screws to the torques indicated below.
FASTENING KIT
2 off HM6x20 screws
U
2 off DEC6 washers
2 off HM6 nuts
2 off HM10x100 screws
1 off 10-28 plain washer
Y
2 off CS10 washers
1 off HM10 nut
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
2 off HM10x25 screws
W
2 off CS10 washers
1 ball Ref.8152
4 off HM16x45 screws
Z
4 off DEC16 washers
4 off HM16 nuts
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM1835-E - FOLIO NDMANG
Type
Type
Approval No.
Tow bar for
e11*94/20*00*1174
AUDI A4
Saloon
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
305337600001
Max. Total
Max. Total
Max. Verti-
Authori. Weight Towable Weight
cal load
1 835 kg
1 700 kg
Value
D
75 kg
8,70 kN