On Indicators; When Disconnecting The Network Cable - Sony CBK-NC01 Manual De Instalación

Ferrite core
15 mm
6
Open up the network connector
cover and connect the network
cable to the network connector.
Then secure the cable with the
cable hook.
35 mm
Notes
• For safety, when connecting
external devices to this
connector, do not connect
connectors which may have
excessive voltage. Follow the
instructions in this manual when
making connections.
• When connecting the network
cable, make sure the connector
tab is correctly oriented.

On indicators

• When the power is supplied from the
camcorder, the POWER indicator
located below the network connector
lights up green.
• When the CBK-NC01 is connected
to the network, the ACT/LINK
indicator flashes green.
• When the network cable has a
transmission speed of 100BASE, the
10/100M indicator lights up orange.
When the network cable has a
transmission speed of 10BASE, the
indicator does not light up.
When disconnecting the
network cable
Press the connector tab towards the
connector as you disconnect the cable.
19