ADDITIONAL INFORMATION
Precautions
On Bluetooth communication
• Bluetooth wireless technology operates within
a range of about 10 meters (about 30 feet).
Maximum communication range may vary
depending on obstacles (person, metal, wall,
etc.) or electromagnetic environment.
Steel cabinet
Optimal performance
Limited performance
• The following conditions may affect the
sensitivity of Bluetooth communication.
– There is an obstacle such as a person, metal,
or wall between this unit and Bluetooth
device.
– A device using 2.4 GHz frequency, such as a
wireless LAN device, cordless telephone, or
microwave oven, is in use near this unit.
– This unit is installed on a shelf made of steel.
• Because Bluetooth devices and wireless LAN
(IEEE802.11b/g) use the same frequency,
microwave interference may occur and
resulting in communication speed
deterioration, noise, or invalid connection if
this unit is used near a wireless LAN device. In
such a case, perform the following.
– Use this unit at least 10 m (about 30 ft) away
from the wireless LAN device.
– If this unit is used within 10 m (about 30 ft)
of a wireless LAN device, turn off the
wireless LAN device.
– Install this unit and Bluetooth device as near
to each other as possible.
16
US
This unit
• Microwaves emitting from a Bluetooth device
may affect the operation of electronic medical
devices. Turn off this unit and other Bluetooth
devices in the following locations, as it may
cause an accident.
– where inflammable gas is present, in a
hospital, train, airplane, or a gas station
– near automatic doors or a fire alarm
• This unit supports security capabilities that
comply with the Bluetooth standard to provide
a secure connection when the Bluetooth
wireless technology is used, but security may
not be enough depending on the setting. Be
careful when communicating using Bluetooth
wireless technology.
• We do not take any responsibility for the
leakage of information during Bluetooth
communication.
• Connection with all Bluetooth devices cannot
be guaranteed.
– A device featuring Bluetooth function is
required to conform to the Bluetooth
standard specified by Bluetooth SIG, and be
authenticated.
– Even if the connected device conforms to the
above mentioned Bluetooth standard, some
devices may not be connected or work
correctly, depending on the features or
specifications of the device.
• Depending on the device to be connected, it
may require some time to start communication.
Notes when using with a mobile
phone
• You cannot use this unit to talk over the
telephone, even if the Bluetooth connection
between this unit and a mobile phone is made.
• For details on operation of your mobile phone
when receiving a telephone call while
transmitting the sound using the Bluetooth
connection, refer to the operating instructions
supplied with the mobile phone.