Maintenance Instructions - Belshaw DOMIX 35 El Manual Del Propietario

2600102 / 11.XII.2001
If during dosing, water is at first delivered regularly, but the litres display does not decrement
accordingly or decrements very slowly and/or irregularly, and after a while water delivery
stops, the buzzer sounds and display flashes:
press the STOP/C key and then the START key:
If after 10-12 seconds the anomaly reoccurs probably the internal litre counter is faulty.
Request technical assistance.
All displays and led indicators remain off:
check the fuse located next to the power supply plug, the housing can be opened with a
screwdriver.
If necessary, replace the fuse using the spare, located in the same housing.
If, after replacing the fuse, the fault persists, request technical assistance.
The device discharges water regularly but the temperature display flashes: the internal
temperature probe is faulty.
Request technical assistance.
To guarantee a long working life for the internal components, clean the filter (3) regularly,
particularly if the water supply has a high limescale content. Clean also filters upstream of
the machine regularly (if mounted).
To clean the external surfaces of the doser-mixer, use a soft sponge and water or possibly a
neutral detergent; for more resistant grime, use turpentine.
POS.
1 Hot water ball gate valve (red, left)
2 Cold water ball gate valve (black, right)
3 Filter – no return valve assembly
4 2 wires liter counter
5 Actuators electronic board /plugs
6 Internal probe
7 Electrovalve internal kit
8 Electrovalve group with coil
9 Ø 16mm delivery hose
10 Electrovalve coil
11 Mixing unit without knob
12 Thermostatic sensor
13 Regulating knob
14 Cover with electronics
4

MAINTENANCE INSTRUCTIONS

DOMIX 35 SPARE PARTS
DESCRIPTION
(see figure n° 3)
230V 50Hz
3801229
3801228
3801230
3801007
3811547
3812522
4400451
3801136
3801209
4400405
3801309
4400351
3801208
3811044
CODE
110V 60Hz
/
/
/
/
3811548
/
/
3801138
/
4400406
/
/
/
/