KRESS FME 1101 Manual Del Usuario página 23

Maintenance and Service
The manufacturer:
hereby declares the following product:
Product designation:
Type designation:
Serial number:
Year of manufacture:
complies with the following basic requirements of Machinery Directive (2006/42/EG): Annex
I, Article 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.4 and 1.5.1.
The partially completed machinery also complies with all requirements of the Electrical
Equipment Directive (2006/95/EG) and Electromagnetic Compatibility (EMC) Directive
2004/108/EC/EMC.
The partially completed machine must not be put into service until it has been ascertained
that the machine into which it is to be incorporated complies with the requirements of the
Machinery Directive (2006/42/EG).
The manufacturer undertakes to transmit to national authorities the relevant documentation
on the partially completed machinery, in electronic form and on request.
The relevant technical documentation for the machine as specified by Annex VII Part B has
been created.
Persons authorised to compile the relevant technical documentation: Klemens Müller,
Wolfgang Auch
Address of the persons authorised to compile the relevant technical documentation: see
manufacturer's address
Bisingen,
March 2010
Date
March 2010
Date
EU Declaration of Incorporation
KRESS-elektrik GmbH & Co. KG,
Hechingerstrasse 48
D-72406 Bisingen
Tel.: +49(0)7476 / 87-0
Integral milling motor
530 FM, 800 FME, 1050 FME, 1050 FME-1
2010XXXXXXX
2010
Klemens Müller
- Quality & Process Representative -
Wolfgang Auch
- Technical Director -
English 23
Signature
Signature
FME-EN / 1101
EN