Maintenance And Service; Maintenance And Cleaning; Environmental Protection - KRESS 650 SBLR-1 Manual Original

Maintenance and Service

6. Maintenance and Service

Maintenance and Cleaning

Before carrying out any work on the
machine, pull the main plug.
Always keep the machine and ventilation
slots clean.
Wipe off the accessible plastic parts regularly
with a cloth without cleaning agent.
Always keep the tool holder clean.
Cleaning the drill chuck
If using the percussion drill frequently, before use,
hold the machine with the drill chuck vertically
downwards and close and open the drill chuck
across the entire clamping range. The collected
dust falls out of the drill chuck hole.
Clean the clamping jaws and the clamping jaw
holes regularly with cleaning spray.
Replacing brushes
Worn carbon brushes should be replaced by an
authorised customer service organisation.
Service
After heavy use over a long period,
the machine should be taken to a
Kress service location for inspection
and thorough cleaning.
The relevant service centres are listed in the en-
closed appendix "SERVICE" or on the website
www.kress-elektrik.de.
Spare parts / exploded view
Exploded views and spare parts lists are available
on our home-page
www.spareparts.kress-elektrik.de

Environmental Protection

Recycle raw materials instead of dis-
posing them as waste. The machine,
accessories and packaging should
be sorted for environmental-friendly
recycling.
The plastic components are labelled
for categorised recycling.
Only for EC countries.
Do not dispose of electric tools
together with household waste mate-
rial!
In observance of the European Directive 2002/96/EC
for waste electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an en-
vironmentally compatible recycling facility.
English 21
EN
SBM-EN/0802