Publicidad
Idiomas disponibles
Idiomas disponibles
5. Undo the four screws securing the rear
mudguard to the frame, then carefully
remove the mudguard assembly from the
motorcycle. Discard the screws.
1
3
2
ffy
1. Rear mudguard
2. Rear light unit wiring connector
3. Rear mudguard fixings
6. Read the warning label attached to the
rack. Once the warning has been noted,
remove and discard the label.
3
3
7. Position the luggage rack to the frame and
secure with the six supplied M8 x 20 mm
screws (four at the rear and one on either
side at the front). Tighten the screws to
18 Nm.
1
ffz
1. Rack
2. Fixings
1
cfga
1. Rack
2. Front fixing (left hand shown)
8. Ensure the rear light wiring grommet is
correctly located in the front edge of the
mudguard then, taking care not to
damage its painted finish, position the rear
mudguard to the frame.
EN
2
2
5
Publicidad
