3) Ignition System
(i) Spark plug
(ii) Flywheel Magneto
(iii) Ignition Coil
4) Miscellaneous Items Used in Above Systems
(i) Fuel hoses. clamps and sealing gaskets
OBTAINING WARRANTY SERVICE
To obtain warranty service, take your engine to the nearest Makita Factory Service Center or
Service Center authorized by MAKITA. Bring your sales receipts indicating date of purchase
for this engine. The dealer or service center authorized by MAKITA will perform the necessary
repairs or adjustments within a reasonable amount of time and furnish you with a copy of the
repair order. All parts and accessories replaced under this warranty become the property of
MAKITA.
WHAT IS NOT COVERED
* Conditions resulting from tampering, misuse, improper adjustment (unless they were made
by the dealer or service center authorized by MAKITA during a warranty repair), alteration,
accident, failure to use the recommended fuel and oil, or not performing required maintenance
services.
* The replacement parts used for required maintenance services.
* Consequential damages such as loss of time, inconvenience, loss of use of the engine of
equipment, etc.
* Diagnosis and inspection charges that do not result in warranty-eligible service being
performed.
* Any non-authorized replacement part, or malfunction of authorized parts due to use of non-
authorized parts.
OWNER'S WARRANTY RESPONSIBILITIES
As the engine owner, you are responsible for the performance of the required maintenance
listed in your owner's manual, MAKITA recommends that you retain all receipts covering
maintenance on your engine, but MAKITA can not deny warranty solely for the lack of receipts
or for your failure to ensure the performance of all scheduled maintenance.
As the engine owner, you should however be aware that the MAKITA may deny your warranty
coverage if your engine or a part has failed due to abuse, neglect, improper maintenance or
unapproved modifications.
You are responsible for presenting your engine to the nearest Makita Factory Service Center or
service center authorized by MAKITA when a problem exists.
17