Method Of Operation - Makita HTR5600 Manual De Instrucciones

Ocultar thumbs Ver también para HTR5600:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Method of operation

Use the Hedge Trimmer only in good light and visibility. During cold seasons
beware of slippery or wet areas, ice and snow (risk of slipping). Always
ensure a safe footing.
Do not overreach or stand on unstable support. Keep good footing and
balance at all times.
Keep both feet on the ground.
Never stand on a ladder and the Hedge Trimmer.
Never climb up into trees to perform cutting operation with the Hedge
Trimmer.
DANGER-CUT HAZAARD-KEEP HANDS AWAY FROM BLADES.
Don't feed twigs or other material to be cut into the blade with your hands or
reach over the moving blade to pick up clippings.
Never grasp the exposed cutting blades or cutting edges when picking up or
holding the tool. CAUTION-Blade may coast after its turned off.
KEEP HANDS AND ALL PARTS OF BODY AWAY
The edges are sharp and can cause injury even when the tool is "OFF".
BEFORE TRIMMING
, inspect areas for wires, cords, glass or other foreign
objects which could come in contact with the blade.
Keep both hands on the handles when operating a Hedge Trimmer.
Never grasp exposed cutting blades of Hedge Trimmer.
Make sure engine is stopped and blades have stopped moving before
clearing jammed material.
Be aware of any and all electric lines and electric fences. Check all areas for
electrical lines before cutting.
To reduce the risk of stumbling and loss of control, do not walk backward
while operating the machine.
Maintenance instructions
Always stop the engine before cleaning or servicing the unit or replacing
parts.
MAINTAIN TOOL WITH CARE.
best and safest performance. Follow instructions for lubricating and proper
maintenance.
Be kind to the environment. Operate the Hedge Trimmer with as little noise
and pollution as possible. In particular check the correct adjustment of the
carburetor.
Clean the Hedge Trimmer at regular intervals and check that all screws and
nuts are securely tightened.
Never service or store the Hedge Trimmer in the vicinity of open flames,
sparks, etc. (11).
Always store the Hedge Trimmer in a well-ventilated locked room and with an
emptied fuel tank out of reach of children.
Observe and follow all relevant accident prevention instructions issued by the trade associations safety board and by insurance
companies.
Do not perform any modifications to the Hedge Trimmer as this will risk your safety.
The performance of maintenance or repair work by the user is limited to those activities as described in this instruction manual. All other work is
to be done by Makita authorized or Factory Service Centers.
Use only genuine spare parts and accessories supplied by MAKITA authorized or factory service centers.
Use of non-approved accessories and tools means increased risk of accidents and injuries. MAKITA will not accept any liability for accidents or
damage caused by the use of any non-approved accessories.
from blade.
Keep cutting edges sharp and clean for
(10)
(11)
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Htr7610

Tabla de contenido