Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Place display module into position on back of new bezel panel. Reinstall four (4) phillips head screws to secure
display to bezel. Reinstall three (3) vent assemblies into correct positions on back of new bezel panel.
7.
Position bezel close to dashboard. Reconnect three (3)
plugs behind the display module.
8 . Carefully reinstall the new bezel into the dashboard. Be sure eleven (11) clips around the outer edge of the bezel
are snapped in correctly. If the shifter bezel is not being replaced at this time, reconnect the negative battery cable
to complete this procedure.
12/15/2010
4X
A
A
A
3
K6861168
Publicidad
