Phasak Kryptos Serie Manual Del Usuario página 24

2.2. Installation and operation
Inspection
Remove UPS from packaging and inspect it for any damage that may have occurred during
transportation. In case of uncovered damage, repackage the unit and return it to the local
where it was purchased.
Connect to Utility Power
Connect the power cord to the mains. Then the UPS will start and charge the internal
battery. For optimal results, charge the battery for a minimum of 6 hours before use.
Plug in Equipment
1. Battery Backup Outlets (3)
Connect computer and monitor to the "Battery Backup" outlets. These outlets
provide battery backup, EMI filtering, line conditioning, and surge protection.
Battery power is automatically provided in case of power failure.
2. Surge-Protected Outlets(3)
Connect a printer, fax machine, or scanner to the "Surge-protected" outlets.
These outlets do not provide power during power failure.
NEVER connect a laser printer or scanner to the battery backup sockets of
UPS. The equipment may draw significantly power to overload the UPS.
Turn On/Off the UPS
To turn on the UPS unit, press the power switch lightly. Then, the LED or LCD will
light up. To turn off the UPS unit, press the power switch again. Then, display will
shut off.
KRYPTOS
CAUTION
PH 9478