Lens Installation; Adjusting The Back Focus - Honeywell L Serie Guia Del Usuario

Lens Installation

Adjusting the Back Focus

The back focus adjustment is accessible at the front end of
the camera housing to adjust the back focal length or
picture focus.
The range of adjustment allows both C- and CS-mount
lenses to be used without the need for a spacer ring.
Figure 4
C
1. Loosen the setscrew with a Phillips screwdriver.
2. Adjust the focus ring to focus the picture.
3. Retighten the setscrew.
Rev 2
C/CS Mount
CS
Setscrew
7 G-113078-002
02/07