Guarantee; Repair Service; Spare Parts; Technical Data - Grizzly EHS710-69R Manual De Instrucciones

Guarantee

• We grant a 24-month warranty for this
appliance.This equipment is not sui-
table for commercial use. Commercial
use will invalidate the guarantee.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee. Certain compon-
ents are subject to normal wear and
tear and are excluded from the guaran-
tee. These include in particular: Tines.
• Furthermore, the prerequisite for gua-
rantee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused from
material or manufacturing faults, will be
made good free of charge, by replace-
ment delivery or repair.
This requires that the appliance is re-
turned to our service center undisman-
tled and with proof of purchase and
guarantee.

Repair service

• Repairs, which are not covered by the
guarantee, can be carried out for char-
ge by our service center. Our service
center will be glad to provide you with
a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
• Note: In case of complaint or service,
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.

Spare Parts

Replacement parts may be ordered di-
rectly from our Service Centre.
When ordering, always specify the ma-
chine type and the part number in the
exploded drawing.

Technical Data

Hedge Trimmer ............... EHS 710-69 R
Input voltage rating ..... 230-240 V~, 50 Hz
Input powe ...................................... 710 W
Safety class ........................................
Degree of protection .......................... IP20
Idling rotation speed .................. 1700 rpm
Weight ............................................3,7 kg
Cutting length .............................. 614 mm
Cutting capacity ............................. 24 mm
Acoustic power level (L
guaranteed ..................................103 dB (A)
measured ............ 98,3 dB(A); K
Sound pressure level
(L ) ...................... 78,3 dB (A); K
pA
Vibration at the
handle (a ) ............. 2,46 m/s
n
Noise and vibration values have been de-
termined according to the standards and
regulations named in the declaration of
conformity.
Technical and optical alterations may be
made without notice for the purposes of
improvement. No guarantee can be given
for the accuracy of dimensions, notices
and specifications stated in this manual.
The manufacturer shall therefore not ac-
cept liability for statutory claims arising
from the manual.
UK
II
)
wA
=3,0 dB
wA
=3,0 dB
pA
; K =1,5 m/s
2
n
107 107
2