Radio; Memorizing Stations Automatically; Best Tuning Memory (Btm); Memorizing Only The Desired Stations - Sony CDX-C6600 Manual De Instrucciones

Radio

Memorizing stations
automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest
signals and memorizes them in the order of
their frequencies. You can store up to 10
stations on each band (FM1, FM2, and AM).
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE), the source
changes as follows:
z TUNER
* If the corresponding optional equipment is
not connected, this item will not appear.
2
Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:
z FM1
3
Press (SHIFT).
4
Press (3) (PLAY MODE) repeatedly until
"BTM" appears.
5
Press (4) (n) until "B.T.M" appears.
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stored.
6
Press (SHIFT).
8
z CD z MD* z TV*
z FM2 z AM
Notes
• The unit does not store stations with weak
signals. If only a few stations can be received,
some number buttons will retain their former
setting.
• When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.
• If a CD is not in the unit, only the tuner band
appears even if you press (SOURCE).
Memorizing only the
desired stations
You can store up to 10 stations on each band
(20 for FM1 and FM2, 10 for AM) in the order
of your choice.
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Push the SEEK/AMS control up or down
to tune in the station that you want to
store on the number button.
4
Press the desired number button ((1) to
(10)) for two seconds until "MEM"
appears.
The number button indication appears in
the display.
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
Receiving the memorized
stations
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (10)) on
which the desired station is stored.