Technical Specifications; Troubleshooting - Boneco U7144 Manual De Instrucciones

Storing the appliance for extended periods
Clean the appliance as described earlier and allow to dry
thoroughly. Preferably store the appliance in its original box,
in a dry place away from high temperatures.
en
Disposal
Return your worn out unit to your dealer for
proper disposal. You can obtain information on
other ways to dispose of the unit from your local
district or town council.
Warranty
The warranty conditions are defined by our representative
in the country of sale. Please contact your dealer if, despite
strict quality control, your appliance becomes defective. You
must present your original receipt when making a claim
under the warranty.

Troubleshooting

Problem
Unit does not operate
No mist output
Weak mist output
White deposit around the
appliance
24

Technical specifications

Mains voltage
Power consumption
Humidity output
Suitable for rooms up to
Water capacity
Dimensions
Weight (empty)
Operating noise level
Accessories
* when used with pre-heating to 80 °C
Possible cause
Power plug not plugged in
No water in the tank
(Empty indicator flashing)
Desired humidity level lower
than actual
Cleaning agent residues
Water temperature too low
Mineral deposits on membrane
Demineralisation cartridge exhausted
230 – 240 V / 50 Hz
45 / 130 – 140 W*
400 / 550 g/h*
60 m / 150 m
2
5.5 litres
254 x 290 x 347 mm
4.0 kg
< 25 dB(A)
Demineralisation cartridge
Ionic Silver Stick (ISS)
®
What to do
Plug in power plug into mains socket
Fill tank with water
Increase humidity setting
Rinse with clear water
Set mist output to maximum. The
appliance will work properly again
after 10 minutes.
Clean membrane
Replace demineralisation cartridge or resin
3