Switching The »Cm-Bt2« On/Off; Pairing The »Cm-Bt2« With A Compatible Telephone; Disconnecting The »Cm-Bt2« From The Telephone - HumanTechnik cm BT2 Instrucciones De Servicio

Switching the »CM-BT2« on/off
Press the function key 4 for approx. 3 seconds until
the blue status indicator lights up. The teleloop/head-
phones will say the words „Power on" to indicate that
3s
the »CM-BT2« is now switched on. If there is a paired
device nearby, the »CM-BT2« will automatically connect
to this device.
To switch off, press the function key 4 for approx. 3
seconds until the red status indicator lights up. The te-
leloop/headphones will say the words „Power off" to
indicate that the »CM-BT2« is now switched off.
Pairing the »CM-BT2« with a compatible telephone
Before you can use the »CM-BT2« with the telephone, it has to be added to
the device list in the telephone. To do so, follow the instructions in the telepho-
ne operating manual explaining how to activate Bluetooth.
1. Switching the telephone on.
2. Press the function key 4 on the »CM-BT2«
for approx. 6 seconds until the blue and red status
6s
indicator flashes alternately. The »CM-BT2«
remains in pairing mode for 2 minutes.
3. Activate the Bluetooth function on the telephone
and start to search for Bluetooth devices.
Instructions on how to do this can be found in
the operating instructions for your telephone.
4. Select the »CM-BT2« from the list of devices that are found.
If necessary, enter the password „0000" to pair the »CM-BT2« and
the telephone and establish a connection.
5. If the pairing is successful, the blue status indicator
on the »CM-BT2« flashes four times quickly and the teleloop and head
phones will say the words „Connected".
22 English
For some telephones, it might be necessary to make the connection manually
once the headset has been registered.
For more information, refer to your telephone's operating manual. You only
have to register the »CM-BT2« on the telephone once. After that, the »CM-
BT2« will be recognized automatically.
The »CM-BT2« is connected to the telephone when the blue status indicator
lights up for 1 second every 5 seconds.
The »CM-BT2« will now appear in the menu of your telephone that displays all
the Bluetooth devices that are currently paired with the telephone.
Disconnecting the »CM-BT2« from the telephone
Perform one of the following steps to terminate the connection between the
»CM-BT2« and the telephone (e.g. when you want to connect another Blue-
tooth device to the telephone):
• Switch the »CM-BT2« off.
• Terminate the connection to the »CM-BT2« in the telephone's
Bluetooth menu.
• Move the »CM-BT2« to a position more than 10 meters away from the
telephone.
Please note: You do not have to delete the »CM-BT2« from the telephone's list
of compatible devices to terminate the connection.
English 23