Reconnecting The »Cm-Bt2« With The Telephone; Basic Operation; Making And Answering Calls; Using The »Cm-Bt2« As Music Headphones With The Telephone - HumanTechnik cm BT2 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
Reconnecting the »CM-BT2« to the telephone
The blue status indicator flashes slowly as soon as the »CM-BT2« becomes
disconnected from the telephone, for example, if the distance between them
is too great.
Once the »CM-BT2« and the telephone are within range of one another again,
the »CM-BT2« reconnects automatically or can be reconnected by pressing
the function key once. The blue status indicator flashes for 1 second every 5
seconds and the teleloop/headphones will say the words „Connected" when
the connection is re-established.

Basic operation

Making and answering calls

To make a call, ensure that the telephone is connected to the »CM-BT2« and
make the call as normal.
To make a call, press the function key 4 briefly.
To end a call, use the buttons on the telephone or press the function key on
the »CM-BT2«.
Using the »CM-BT2« as music headphones with the telephone
If there is a music player integrated in your telephone, you can also use the
»CM-BT2« to listen to music. As soon as an incoming call is detected, the
music will be interrupted, the »CM-BT2« will ring and you can press the func-
tion key 4 to answer the call. The music will continue to play once you have
ended the call.
24 English

Adjusting the listening volume

Press the „+" button on the volume keys 6 repeatedly to
increase the volume.
The neckloop/headphones emit an high tone signal
when the maximum volume is reached.
Press the „-" button on the volume keys 6 repeatedly to
decrease the volume.
The neckloop/headphones emit an low tone signal
when the lowest volume is reached.
The »CM-BT2« has an additional volume setting 5 to
increase the volume of the neckloop independently.
Turn the control dial on the additional volume setting to
adjust the volume.
The additional volume setting only works with the neck-
loop and has no impact on the output of the headpho-
nes.
Before you use the »CM-BT2« always make sure that the volu-
me is set to a comfortable level to prevent any injury that
exces sive volume might cause. Always set the volume to a
low level.
English 25

Publicidad

Tabla de contenido
loading

Tabla de contenido