AEG DVD 4520 HDMI Manual De Instrucciones página 55

P-Scan: Set the video output to progressive component output
HD: Set the video output to high definition output
Note1: When the player is connected to a TV set of progressive scanning though YPbPr,
select P-SCAN. When it is connected to a common TV set, select Component.
If TV screen has no output after selecting P-SCAN, you can press V-MODE button to
switch the state, it will output normally.
If you select SCART connection, you should set up the play mode as RGB state,
then it will output normally.
If you select HDMI connection, you should set up the play mode as HD state, then it
will output normally.
Note2: Set video output type to "Component", "RGB" or "P-Scan".
HD resolution menu should be disabled.
HDMI should stop working
HD JPEG mode menu should be disabled.
Note3:Set video output type to HD.
HD resolution menu should be enabled and set to "Auto" responding to this action.
"HD/es." key is valid to switch HD resolution only at this case.
HDMI module can work only at this case.
No CVBS at HD resolution
No OSD and sub-picture at HD-JPEG mode
9.2.5 HD Resolution
Used to set the resolution of HDMI image output. In this option, you can select different
HDMI
image resolution.
Note: If TV screen has no output after selecting HD Resolution, you can press SETUP
once then press V-MODE button or restart the player and press V-MODE button to switch
the state, it will output normally.
9.2.6 HD Jpeg Mode
Select ON or OFF to switch HD JPEG play mode
Note 1:HDMI is plugged out when HD-JPEG is being played.
Note2:HDMI is plugged out when DVD is being played.
GB-22