Warranty Conditions - Altrex RS TOWER 51 Manual De Instrucciones

10. Disassembly of the rolling tower
The scaffold should be disassembled following the instructions for assembly but in reverse order.
11. Inspection, Care and Maintenance
1. Scaffolds used in a professional capacity must be inspected periodically by an expert. Local legislation and regulations may contain
supplementary measures on top of this guide.
2. Scaffold parts must be handled and transported with care in order to avoid damage.
3. Storage should be organised in such a way that only undamaged parts, in the correct amounts, are available for assembly of the scaffold.
4. Check all moving parts for correct functioning and check that these are not filthy.
5. Check all parts for damage. Damaged, worn-out or incorrect parts may not be used. Replace these parts only with original Altrex parts.
To prevent accidents, these parts must be mounted in the same way as the part that is replaced. Mounting (fastening) and/or repair are
at your own expense and risk. Altrex shall not be liable for damage resulting from erroneous mounting and/or repair.
6. Production code (JJ-WW) can be found on: braces, the tube, frames, the upright, platforms, inside platform beams, stabilizers and the
outside tube.

12. Warranty conditions

Please visit www.altrex.com/warranty to view the clauses of the Altrex warranty.
13. Abbreviations and logos
Abbreviation/logo
WH
PH
KG
KG
L
B
Indoor use
Outdoor use
Wood
Fiber-Deck®
All rights reserved. No part of this publication may be duplicated, stored in an automated database, or disclosed in any way or manner,
whether electronically, mechanically by photocopying, recording, or in any other way, without prior permission of Altrex BV Zwolle. This
publication may only be used for Altrex products. Misprints and printing errors reserved.
Meaning
Working height
Platform height
Kilogramme
Length
Width
Indoor use
Outdoor use
Wood
Fiber-Deck® light-weight platforms
31
www.altrex.com
EN